ABB AC500 V3 - 1.4.3.1.5 Ordering data

Parameter Value
Protocol CANopen master (in preparation), CAN2A,
CAN2B
Transmission rate 10 kbit/s to 1 Mbit/s
Ambient temperature see:
System data AC500 Ä Chapter 2.6.1 “System
data AC500” on page 971
System Data AC500 XC
Ä Chapter 2.7.1
“System data AC500-XC” on page 1023
Usable terminal bases All TB5xx
Field bus connector Pluggable connector COMBICON, 5-pin
Technology Hilscher NETX 100
Indicators 5 LEDs
Internal power supply Via the communication module interface of the
terminal base
Current consumption from 24 V DC power
supply at the Terminal Base of the CPU
Typ. 65 mA
Number of Slaves Max. 126
Number of receive/transmit PDOs Max. 512 (respectively for receive and
transmit)
Total quantity of input and output data Max. 3584 byte (respectively for input and
output)
Weight Ca. 150 g
1.4.3.1.5 Ordering data
Part no. Description Product life cycle phase *)
1SAP 173 800 R0001 CM598-CN, communication module
CANopen master
Active
1SAP 373 800 R0001 CM598-CN-XC, communication
module CANopen master, XC version
Active
*) Modules in lifecycle Classic are available from stock but not recommended
for planning and commissioning of new installations.
Device specifications
Communication modules (AC500 standard) > CANopen
2022/01/31 3ADR010278, 3, en_US 111