TA543 must be snapped on the backside of PM50xx
Ä
Chapter 2.5.3.1.3 “Mounting a processor
module on a metal plate” on page 935.
1 Screw mounting accessory TA543
2 Slot for screw mounting accessory TA543
3 2 holes for screw mounting
Parameter Value
Weight 5 g
Dimensions 12 mm x 8.5 mm x 10 mm
Part no. Description Product life cycle phase *)
1SAP 182 800 R0001 TA543, screw mounting
accessory for PM50x2
Active
*) Modules in lifecycle Classic are available from stock but not recommended
for planning and commissioning of new installations.
2.5.5.6 TA566 - Wall mounting accessory
The TA566 wall mounting accessory is used for mounting S500-eCo I/O modules without DIN
rail.
Handling
instruction
Technical data
Ordering data
Intended pur-
pose
System assembly, construction and connection
AC500-eCo > Handling of accessories
2022/01/313ADR010278, 3, en_US970
To Next Page
Loading...
