ABB AC500 V3 - Technical data of the analog inputs, if used as digital inputs; Technical data of the analog outputs

Parameter Value
Relationship between input signal and hex
code
Tables Input Ranges Voltage, Current and
Digital Input Ä Chapter 1.7.3.1.10.1 “Input
ranges voltage, current and digital input”
on page 703 and Input range resistance
temperature detector
Ä Chapter 1.7.3.1.10.2
“Input ranges resistance temperature detector”
on page 704
Unused inputs Are configured as "unused" (default value)
Overvoltage protection Yes
Technical data of the analog inputs, if used as digital inputs
Parameter Value
Number of channels per module Max. 4
Distribution of channels into groups 1 group of 4 channels
Connections of the channels AI0+ to AI3+ Terminals 1.0 to 1.3
Reference potential for the inputs Terminals 1.9, 2.9 and 3.9 (ZP)
Indication of the input signals 1 LED per channel
Input signal voltage 24 V DC
Signal 0 -30 V...+5 V
Undefined signal +5 V ... +13 V
Signal 1 +13 V...+30 V
Input current per channel
Input voltage +24 V Typ. 7 mA
Input voltage +5 V Typ. 1.4 mA
Input voltage +15 V Typ. 3.7 mA
Input voltage +30 V < 9 mA
Input resistance Ca. 3.5 kW
Technical data of the analog outputs
Parameter Value
Number of channels per module 2
Distribution of channels into groups 1 group for 2 channels
Connection of the channels AO0+...AO1+ Terminals 1.5...1.6
Reference potential for AO0+ to AO1+ Terminal 1.7 (AO-) for voltage outputTerminals
1.9, 2.9 and 3.9 (ZP) for current output
Output type
Unipolar Current
Bipolar Voltage
Galvanic isolation Against Ethernet network
Configurability -10 V...+10 V, 0 mA...20 mA, 4 mA...20 mA
(each output can be configured individually)
Device specifications
Communication interface modules (S500) > EtherCAT
2022/01/313ADR010278, 3, en_US710