ABB AC500 V3 - 2.5.3.1.5 Mounting of TA5301-CFA; 2.5.3.2 Mounting and demounting option boards; 2.5.3.2.1 Inserting the option board

2.5.3.1.5 Mounting of TA5301-CFA
1 TA5301-CFA cable fixing accessory
2 2 openings on the PM50x2 processor module
Insert the TA5301-CFA cable fixing accessory into the two openings on the PM50x2
processor module marked white in the figure.
2.5.3.2 Mounting and demounting option boards
2.5.3.2.1 Inserting the option board
After mounting the PM50x2 processor module on the DIN rail, mount the option board.
Press the option board TA51xx (or TA5300-CVR) into the slot of the processor module
PM50x2 until it locks in place.
The option board must click into the slot of the processor module.
System assembly, construction and connection
AC500-eCo > Mounting and demounting
2022/01/31 3ADR010278, 3, en_US 937