ABB AC500 V3 - 1.8.3.2 TA525 - Plastic labels

Part no. Description Product life cycle phase *)
1SAP 180 500 R0001 TA523, pluggable label
mounting (10 pieces)
Active
*) Modules in lifecycle Classic are available from stock but not recommended
for planning and commissioning of new installations.
1.8.3.2 TA525 - Plastic labels
Accessory to label AC500 and S500 modules.
DC532
1.0 I0
1.1 I1
1.2 I2
1.3 I3
1.4 I4
1.5 I5
1.6 I6
1.7 I7
1.8 UP
1.9 ZP
2.0 I8
2.1 I9
2.2 I10
2.3 I11
2.4 I12
2.5 I13
2.6 I14
2.7 I15
2.8 UP
2.9 ZP
3.0 C16
3.1 C17
3.2 C18
3.3 C19
3.4 C20
3.5 C21
3.6 C22
3.7 C23
3.8 UP
3.9 ZP
4.0 C24
4.1 C25
4.2 C26
4.3 C27
4.4 C28
4.5 C29
4.6 C30
4.7 C31
4.8 UP
4.9 ZP
CH-ERR3 CH-ERR4
16 DI 16 DC
Input 24 V DC
Output 24 V DC 0.5 A
CH-ERR2CH-ERR1
TA525
DC532
1.0 I0
1.1 I1
1.2 I2
1.3 I3
1.4 I4
1.5 I5
1.6 I6
1.7 I7
1.8 UP
1.9 ZP
2.0 I8
2.1 I9
2.2 I10
2.3 I11
2.4 I12
2.5 I13
2.6 I14
2.7 I15
2.8 UP
2.9 ZP
3.0 C16
3.1 C17
3.2 C18
3.3 C19
3.4 C20
3.5 C21
3.6 C22
3.7 C23
3.8 UP
3.9 ZP
4.0 C24
4.1 C25
4.2 C26
4.3 C27
4.4 C28
4.5 C29
4.6 C30
4.7 C31
4.8 UP
4.9 ZP
CH-ERR3 CH-ERR4
16 DI 16 DC
Input 24 V DC
Output 24 V DC 0.5 A
CH-ERR2CH-ERR1
2
UP 24VDC 200WUP 24VDC 200W
1
1 Module without plastic label TA525
2 Module with plastic label TA525
The plastic labels are suitable for labelling AC500 and S500 modules (CPUs, communication
modules and I/O modules). The small plastic parts can be written on with a standard waterproof
pen.
The plastic labels are inserted under a slight pressure. For disassembly, a small screwdriver is
inserted at the lower edge of the module.
Parameter Value
Use For labelling AC500 and S500 modules
Mounting Insertion under a slight pressure
Ordering data
Purpose
Handling
instructions
Technical data
Device specifications
Accessories > S500
2022/01/313ADR010278, 3, en_US904