ABB AC500 V3 - 1.7.5.3.4 Internal data exchange; 1.7.5.3.5 Addressing; 1.7.5.3.6 I;O configuration; 1.7.5.3.7 Parameterization

In corrosive environment, please protect unused connectors using the TA535
accessory.
Not supplied with this device.
For further information regarding wiring and cable types see chapter Ethernet
Ä Chapter 2.6.4.7 “Ethernet connection details” on page 997.
1.7.5.3.4 Internal data exchange
Parameter Value
Digital inputs (bytes) 5
Digital outputs (bytes) 5
Counter input data (words) 4
Counter output data (words) 8
1.7.5.3.5 Addressing
The module reads the position of the rotary switches only during power-up, i. e.
changes of the switch position during operation will have no effect until the next
module initialization.
1.7.5.3.6 I/O configuration
The CI502-PNIO stores some PROFINET configuration parameters (I/O device identifier, I/O
device type and IP address configuration). No more configuration data is stored.
The digital I/O channels are configured via software.
Details about configuration are described in Parameterization Ä Chapter 1.7.5.3.7 “Parameteri-
zation” on page 845.
1.7.5.3.7 Parameterization
Parameters of the module
Name Value Internal value Internal value,
type
Default
Module ID
1
)
Internal 7005 WORD 7005
Parameter length Internal 8 BYTE 8
Device specifications
Communication interface modules (S500) > PROFINET
2022/01/31 3ADR010278, 3, en_US 845