ABB AC500 V3 - Connection of active-type analog sensors (Voltage) with galvanically isolated power supply

Connection of active-type analog sensors (Voltage) with galvanically isolated power supply
UP
ZP
1.0
I0-
1.1
I0B
1.8
UP
1.9
ZP
PTC
2.0
I0+
2.1
I0A
2.8
UP
2.9
ZP
-50 ... +50 mV
-500 ... +500 mV
-1 ... +1 V
-5 ... +5 V
-10 ... +10 V
-50 ... +50 mV
0 ... +5 V
0 ... +10 V
+
-
U
IN
Fig. 34: Connection example
The measuring ranges can be configured Ä Chapter 1.6.2.2.3.6 “Parameterization”
on page 472:
Voltage -50 mV...+50 mV 1 channel used
Voltage -500 mV...+500 mV 1 channel used
Voltage -1 V...+1 V 1 channel used
Voltage -5 V...+5 V 1 channel used
Voltage -10 V...+10 V 1 channel used
Voltage 0 V...+5 V 1 channel used
Voltage 0 V...+10 V 1 channel used
Fig. 35: Connection example
The measuring range can be configured Ä Chapter 1.6.2.2.3.6 “Parameterization” on page 472:
Voltage Common mode voltage 1 channel used
Standard ranges
Common mode
range (+/-20 V)
Device specifications
I/O modules > Analog I/O modules
2022/01/313ADR010278, 3, en_US458