Parameter Value
Internal supply Via I/O bus
External supply Via the terminals L+ (process voltage 24 V
DC) and M (0 V DC); the M terminal is con-
nected to the M terminal of the CPU via the
I/O bus
Connections
For a detailed description of the mounting, disassembly and connection of the
module, please refer to the System Assembly chapter
Ä
Chapter 2.5 “AC500-
eCo” on page 925.
If the output is configured as not used, the voltage and current output signals
are undefined and must not be connected.
The connection is carried out by using a removable 9-pin and 11-pin terminal block. These
terminal blocks differ in their connection system (spring terminals or screw terminals, cable
mounting from the front or from the side). The terminal blocks are not included in the module's
scope of delivery and must be ordered separately.
The following block diagram shows the internal construction of the analog inputs and outputs:
I/O modules > Analog I/O modules
2022/01/313ADR010278, 3, en_US394
To Next Page
Loading...
