ABB AC500 V3 - Group parameters for the analog part; Channel parameters for the analog inputs (4 x)

Group parameters for the analog part
Name Value Internal value Internal value,
type
Default
Analog data
format
Standard
Reserved
0
255
BYTE 0
Behaviour AO at
comm. error *)
Off
Last value
Last value 5 s
Last value 10 s
Substitute value
Substitute value
5 s
Substitute value
10 s
0
1
6
11
2
7
12
BYTE 0
*) The parameter Behaviour AO at comm. error is only analyzed if the Failsafe-mode is ON.
Channel parameters for the analog inputs (4x)
Name Value Internal value Internal value,
type
Default
Input 0, Channel
configuration
Table Operating
modes of the
analog inputs
Ä Table 156 “Ch
annel configura-
tion”
on page 752
Table Operating
modes of the
analog inputs
Ä Table 156 “Ch
annel configura-
tion”
on page 752
BYTE 0
Input 0, Check
channel
Table Channel
montoring
Ä Table 157 “Ch
annel monitoring”
on page 752
Table Channel
montoring
Ä Table 157 “Ch
annel monitoring”
on page 752
BYTE 0
: : : : :
: : : : :
Input 3, Channel
configuration
Table Operating
modes of the
analog inputs
Ä Table 156 “Ch
annel configura-
tion”
on page 752
Table Operating
modes of the
analog inputs
Ä Table 156 “Ch
annel configura-
tion”
on page 752
BYTE 0
Input 3, Check
channel
Table Channel
montoring
Ä Table 157 “Ch
annel monitoring”
on page 752
Table Channel
montoring
Ä Table 157 “Ch
annel monitoring”
on page 752
BYTE 0
Device specifications
Communication interface modules (S500) > Modbus
2022/01/31 3ADR010278, 3, en_US 751