ABB AC500 V3 - Technical data of the analog inputs, if used as digital Inputs; Technical data of the analog outputs

Parameter Value
Unused current inputs Have a low resistance, can be left open-circuited
Overvoltage protection Yes
Technical data of the analog inputs, if used as digital Inputs
Parameter Value
Number of channels per module Max. 8
Distribution of channels into groups 1 group of 8 channels
Connections of the channels I0+ to I7+ Terminals 2.0 to 2.7
Reference potential for the inputs Terminals 1.9, 2.9, 3.9 and 4.9 (ZP)
Input signal delay Typ. 8 ms, configurable from 0.1 to 32 ms
Indication of the input signals 1 LED per channel
Input signal voltage 24 V DC
Signal 0 -30 V...+5 V
Undefined signal +5 V...+13 V
Signal 1 +13 V...+30 V
Input current per channel
Input voltage +24 V Typ. 7 mA
Input voltage +5 V Typ. 1.4 mA
Input voltage +15 V Typ. 4.3 mA
Input voltage +30 V < 9 mA
Input resistance Ca. 3.5 kW
Technical data of the analog outputs
Parameter Value
Number of channels per module 8, all channels for voltage, the first 4 channels
also for current
Distribution of channels into groups 1 group of 8 channels
Channels O0-...O7- Terminals 3.0...3.7
Channels O0+...O7+ Terminals 4.0...4.7
Output type Bipolar with voltage, unipolar with current
Galvanic isolation Against internal supply and other modules
Configurability -10 V...+10 V, 0 mA...20 mA, 4 mA...20 mA
(each output can be configured individually),
current outputs only channels 0...3
Output resistance (load), as current output 0 W...500 W
Output loadability, as voltage output Max. ±10 mA
Indication of the output signals One LED per channel
Resolution 12 bits (+ sign)
Device specifications
I/O modules > Analog I/O modules
2022/01/31 3ADR010278, 3, en_US 547