ABB AC500 V3 - Diagnosis

Table 94: Channel monitoring
Internal
value
Monitoring
0 Plausibility, open-circuit (cut wire) and short circuit (default)
3 No monitoring
Table 95: Line frequency suppression
Internal
value
Line frequency suppression
0 50 Hz
1 60 Hz
2 No line frequency suppression
Table 96: Compensation channel
Internal
value
Compensation channel
0 Internal compensation (default)
1 Channel 0 (possible with channels 1, 2, 3)
2 Channel 1 (possible with channels 0, 2, 3)
3 Channel 2 (possible with channels 0, 1, 3)
4 Channel 3 (possible with channels 0, 1, 2)
5 Channel 4 (possible with channels 5, 6, 7)
6 Channel 5 (possible with channels 4, 6, 7)
7 Channel 6 (possible with channels 4, 5, 7)
8 Channel 7 (possible with channels 4, 5, 6)
9 External with temperature value
Diagnosis
E1...E4 d1 d2 d3 d4 Identifier
000...063
AC500
display
<− Display in
Class Comp Dev Mod Ch Err PS501
PLC
browser
Byte 6
Bit 6...7
- Byte 3 Byte 4 Byte 5 Byte 6
Bit 0...5
FBP diag-
nosis
block
Class Interface Device Module Channel Error
identifier
Error message Remedy
1
)
2
)
3
)
4
)
Module error
3 14 1...10 31 31 19 Checksum error in the
I/O module
Replace
I/O module
11 / 12 ADR 1...10
Device specifications
I/O modules > Analog I/O modules
2022/01/31 3ADR010278, 3, en_US 475