1. Press on the option board slot cover to insert it in the not used option board slot of the
processor module PM50xx.
2. The option board slot cover must click into the not used option board slot.
1. Press the side of the inserted option board slot cover.
2. At the same time, pull the option board slot cover out of the option board slot of the
processor module PM50xx.
The system data of AC500-eCo V3 apply
Ä
Chapter 2.5.1 “System data AC500-eCo V3”
on page 925
Only additional details are therefore documented below.
Parameter Value
Weight 47 g
Dimensions 42.1 mm x 30.8 mm x 23.55
Inserting of the
option board
slot cover
Removing of the
option board
slot cover
Technical data
2022/01/313ADR010278, 3, en_US878
To Next Page
Loading...
