The battery lifetime is the time, the battery can store data while the processor module is not
powered. As long as the processor module is powered, the battery will only be discharged by its
own leakage current.
To avoid a short battery discharge, the battery should always be inserted or
replaced while the process module is under power, then the battery is correctly
recognized and will not shortly discharged.
To ensure propper operation and to prevent data loss, the battery insertion or
replacement must be always done with the system under power. Without battery
and power supply there is no data buffering possible.
WARNING!
Risk of fire or explosion!
Use of incorrect Battery may cause fire or explosion.
Battery lifetime
Insertion
Accessories > AC500 (standard)
2022/01/313ADR010278, 3, en_US898
To Next Page
Loading...
