One TA566 wall mounting accessory
Ä
Chapter 2.5.5.6 “ TA566 - Wall
mounting accessory” on page 970 is needed per S500-eCo I/O module.
1. Snap in the TA566 at the back side of the I/O module.
2. Attach the I/O module by hand to an other module. The serial I/O bus is connected
automatically.
System assembly, construction and connection
AC500-eCo > Mounting and demounting
2022/01/31 3ADR010278, 3, en_US 941
To Next Page
Loading...
