169
□ Example of log file
Before change -> After change
- Change of Bit device -
M0(Inner aux.relay#1) -> R0(Keep relay for power failure#1)
M1(Inner aux.relay#1) -> R1(Keep relay for power failure #1)
M2(Inner aux.relay#1) -> R2(Keep relay for power failure #1)
M3(Inner aux.relay#1) -> R3(Keep relay for power failure #1)
- Change of Word device -
T0(Timer current value[100ms]) -> EV0(Timer current value[10ms])
T1(Timer current value[100ms]) -> EV1(Timer current value[10ms])
T2(Timer current value[100ms]) -> EV2(Timer current value[10ms])
C0(Counter current value[16b]#1) -> EV200(Counter current value[1000ms]#1)
C5(Counter current value[16b]#1) -> EV205(Counter current value[1000ms]#1)
D0(Data register#1) -> DT0(Data register)
D100(Data register#1) -> DT100(Data register)
To Next Page
Loading...