Autonics GP Series User Manual

287
B. Word operation
(1) Word configuration of 16bit : Assign the value to 16bit word device.
(2) Word configuration of 32bit : Assign the value to 32bit word device.
•It is able to configure with fixed value and designate indirectly using device.
Example of indirect designation : In case, configure trigger device as M100(ON), fixed value=10,
indirect device=50 for D100, the value of D50+10 is configured in D100 when M100 is ON.
34.2 DETAIL CONFIGURATION AND OPERATION IN EDITOR
• When trigger is occurred, the number of save device monitored in each project and screen are 40
and the number of trigger can be monitored are 80 at a time.
• When configuring observe bit for a screen, observe bit of overlap screen called on base screen is
not operated, observe bit configured in base screen is operated only.
• Observe function is not available for window screen.
M100=OFF
D50=853
D100=34
34
D100
M100=ON
D50=853
D100=34
863
D100

Autonics GP Series Specifications

General

Brand	Autonics
Model	GP Series
Category	Control Panel
Language	English