Autonics GP Series User Manual

216
21.5 TOUCH KEY FOR ALARM HISTORY
Cursor control to select specific line displaying detail information in basic function of alarm history is
used with appropriate key code in touch key configuration and arrange on a screen.
Key code
Function
Descriptions
FFA4h
Cursor ON
When touching touch key with key code FFA4, it is displayed as top
item of alarm list is selected, if there is an alarm in alarm list
screen.
FFA5h
Cursor OFF
When touching touch key with key code FFA5, cursor is
disappeared in alarm list.
FFABh
Cursor UP
When touching touch key with key code FFAB, upper item of
currently selected is changed as selected status.
FFACh
Cursor
DOWN
When touching
touch key with key code FFAC, below item of
currently selected is changed as selected status.
FFA8h
Delete
When touching touch key with key code FFA8, currently selected
item is deleted.
FFA9h
Delete all
When touching touch key with key code FFA9, restored alarm list is
deleted.
FFA6h
Call detail
screen
When touching touch key with key code FFA6, detail screen[window
comment or base screen] of currently selected item is displayed.
FFAAh
Device
Reset
When device designating monitor device reset is ON and the item of
alarm list is selected, touch the key with key code FFAA, the device
is reset.
(1) Cursor ON (FFA4h)
Occurred Message
02/12/04 10:10:12 M0 ON
02/12/04 10:14:43 M2 ON
Cursor on
Press touch key configured as
FFA4h.
The top row is selected.
Occurred Message
02/12/04 10:10:12 M0 ON
02/12/04 10:14:43 M2 ON
Cursor off
Cursor on
Cursor off

Autonics GP Series Specifications

General

Brand	Autonics
Model	GP Series
Category	Control Panel
Language	English