Autonics GP Series User Manual

141
11.4 MEMORY FUNCTION
It confirms screen organization, memory capacity and firmware version of main device of project in
GP and deletes specific screen of project. It shows detail information about project to user not
loading all data reading memory.
11.4.1 Operation procedure
(1) Select [Communication]-[Memory] in a menu.
(2) Warning message about stopping monitor is appeared.
(3) Password window is popped up, if communication password is registered and it cancels memory
command, if inputted password is not matched.
(4) Memory window is popped up if password(Communication password of security window) is not
registered or password is matched.
(5) It executes requiring operation in memory window.
11.4.2 Detail description of memory window
Base tap
View, select and delete base screen in GP
Project title
•
Display project title in main device.
Project ID
•
Display project ID in main device.
Base screen
• Display list of all base screen existing in project of main device.
• Check specific item in a list, delete button is activated and checked item is
deleted from main device memory pressing delete button.
Delete all
•
Delete all base screen in main device.
Delete
•
Adjust checked item in a list.
User area size
•
Display available total memory size as byte unit.
Available size
•
Display remaining size of available space as byte unit.
Close
•
Exit window.

Autonics GP Series Specifications

General

Brand	Autonics
Model	GP Series
Category	Control Panel
Language	English