161
13.3 CHANGE PLC TYPE
Select the device connecting to GP first. Selecting [Common]-[GP/PLC type], GP/PLC type window
is displayed, it is able to change PLC type and device using in a project as automatic or manual in
this box.
13.3.1 PLC connection
▪Refer to “Communication manual” because connection method is different in accordance
with PLC type.
▪It is able to connect all equipments including PLC to both RS232C/RS422.
Designate PLC type correctly to operate downloaded screen data in GP.
PLC connection window is displayed to designate PLC type for designing new project.
PLC connection window is not displayed when select of project group box in [Project]-[Option] menu is
selected, [Select program when program is started] is not checked and it makes project same with
previous configuration.
In order to change project type created with this option, select [Common]-[GP/PLC type] menu.
It is able to executes device using in project as automatic or manual.
To Next Page
Loading...