299
36. SECURITY FUNCTION
In order to allowed user can observe or adjust important data, designate password on base screen
and system screen and register password to access.
36.1 BASIC FUNCTION
To configure security in any screen, set the value as security level excluding 0 in screen auxiliary
configuration window and it is able to configure 0~15. The screen with security level 0 can be
accessed by anyone without register specific password.
Designate password for the appropriate security level in security window. To access the screen for
operation in main device, security should be cancelled by register higher password of the security level.
For example, user knows password of security level 5, register password of level 5 and operate all
screen configured under level 5. It cannot be access over level 6.
●Calling of key window for password register
- Press touch key of function key(FFA6), key window is popped up to input password.
- When it is switched into screen with higher level than security cancelled level, key window is called
to input password automatically.
match.
When switching into the next screen, key
window is called to register input if
security is configured.
Register password for the
appropriate security level.
Message is popped up when password is
not matched.
It is switched into the next screen
security configured.
Screen is switched when password is
matched.
Password code is showed when password input
key window is displayed, it is encoded about
the top level password. When it cannot be used
because you lose the password, send to us this
code and we will inform you the password.
To Next Page
Loading...
Need help?
General