Autonics GP Series User Manual

77
After selecting new project, call GP/PLC type window to select PLC type. Call project auxiliary
configuration window, designate required items and create new project with base screen B-1.
(2) When selecting ‘Select every time’ in project and not checking ‘Show “Select project” dialog
when you start GP Editor’: Create default project having a base screen B-1 when program is
started and it follows the previous project configuration in this case.
(3) When selecting ‘Fixed’ for project :
Open designated project on edit box when program is started.
7.1.2 Create new project
Create new project selecting [PROJECT-NEW] of main menu, pressing CTRL+L or NEW PROJECT of
tool bar. Configure basic GP/PLC type when creating new project, designate basic configuration
including edit direction, communication, language as PROJECT AUXILIARY CONFIGURATION.
This is for reducing data writing error providing required items automatically when user create new
project. User should keep this comment to protect from design errors when creating project and
designate type of connection equipment, then, device of connection equipment can be defined
automatically for editing.
New
project
Designate
GP/PLC type
Designate
project
auxiliary
configuration
Save project
Is project saved?
Complete creating
project

Autonics GP Series Specifications

General

Brand	Autonics
Model	GP Series
Category	Control Panel
Language	English