53
The configuration and operation of backlight is valid when the status of backlight control device is
set (ON) and it is not worked when it is reset (OFF).
Please refer to the detail for system information.
3.5.9 Battery
It is displayed as percentage for battery remaining.
Number Function and operation
It displays the battery capacity up to 100%~0% as bar graph.
It displays the battery capacity up to 100%~0% as numerically.
○3
The bat low message is flickered at a second intervals as of 0% of capacity.
※Notice
• Please contact close distributor and change battery or it may cause an explosion accident
when using non-certified batteries.
To Next Page
Loading...