Autonics GP Series User Manual

198
18.3.3 Trigger tap
Trigger tap
Designate trigger condition
①Trigger type
• Designate trigger type
• Common: Do not use trigger function.
• ON: Use ON trigger.
•
OFF: Use OFF trigger.
②Device
• Designate bit device calling device window.
•
It is deactivated when trigger type is common.
③Device
• Selected by ②, display bit device or input by user directly
•
It is deactivated when trigger type is common.
ASCII input
trigger
• It satisfies trigger condition when bit device of ③ has status of ①.
• Calling key window check box is checked when touch is detected in project
auxiliary configuration: It is able to input calling key window with pressing tag
input area when the trigger condition is satisfied. If trigger condition is not
satisfied, buzzer is sound and key window is not called when pressing tag input
area.
• Cursor and key window is configured as display in
project auxiliary
configuration: If there is not input tag satisfied trigger condition, it is not able to
input because key window is not called when switching screen.
①
② ③

Autonics GP Series Specifications

General

Brand	Autonics
Model	GP Series
Category	Control Panel
Language	English