Autonics GP Series User Manual

265
30.1.3 Screen switching
Switch screen when touching tag.
There are 4 operation modes for screen switching function as follows.
(1) +1 of screen movement : Move from current screen number to adjacent upper screen.
(2) -1 of screen movement : Move from current screen number to adjacent lower screen.
(3) Move to designated screen : Switch to designated screen number of screen.
(4) Move to previous screen : Move to previous screen before switched as current screen.
It changes saving device value of base number displaying on GP with touch operation. Simultaneously,
it is switched as base screen of configuration number with screen designated. Only one operation is
executed for one touch key.
30.1.4 Special function with Key code
Touch function with key code is divided into input key in numeral/ASCII input and touch for alarm list,
alarm history and security function. The former one, key code conforms to ASCII code of character to
be inputted and the character is inputted in input field when it touched. The latter one, it uses special
code.
GP
PLC
D0=10
Device=D100
GP
PLC
D0=15
Device=D100
Screen is switched into designated screen and device
value of screen switching is changed when it touched.
Example of screen switching operation
: When device of screen switching is D0.
Screen no.10
Screen no.15

Autonics GP Series Specifications

General

Brand	Autonics
Model	GP Series
Category	Control Panel
Language	English