Autonics GP Series User Manual

212
• Type : Fixed as bit. (Word device is not supplied.)
• Device : Configure the lead bit device to monitor.
• Comment no. : Configure comment no. to display the appropriate message.
Call comment list window pressing view button, check and designate comment
no..
• Display no. : Designate no. to be displayed in ③.
Pressing touch key of detail screen, it will be a comment no. to be displayed on
comment window when detail display is comment window.
Pressing view button in this case, call comment list window, check and
designate comment no.
Pressing touch key of detail screen, it will be a base screen no. to be switched
when detail display is base screen. Pressing view button in this case, call screen
image window, check and designate comment no.
• Device reset : The device with this item will be reset when pressing touch key
with code value of FFAAH.
⑥Copy
• Designate device reset and copy display no. property(③).
• Among device reset designation/display number of source no. in a list, copy
checked property from destination no. to item of the numbers of copy.

Autonics GP Series Specifications

General

Brand	Autonics
Model	GP Series
Category	Control Panel
Language	English