Autonics GP Series User Manual

293
※Notice
(1) It is required to notice for using because the maximum memory capacity to execute recipe
function can be allotted up to approximately 256X4000X(16bit)=2,000kbyte, but actual memory
capacity of GP is below the level.
(2) Flash memory can be damaged when executing write operation more than regular frequency, it is
required to notice to configure PLC program or related device not to occur write trigger frequently.
Write recipe
Read trigger device of PLC
Does it satisfy write
trigger condition?
Yes
Read recipe device and find recipe file
number.
Configure all PLC devices registered in
recipe file as designated value in recipe.
Wait until next process cycle.
Read recipe
Read trigger device of PLC
Does it satisfy read
trigger condition?
Yes
Read recipe device and find recipe file
number.
Read all PLC devices registered in recipe
file, adjust recipe file to recipe device value
change into current value of the device.
Wait until next process cycle.
No No

Autonics GP Series Specifications

General

Brand	Autonics
Model	GP Series
Category	Control Panel
Language	English