Configuring SNTP Settings
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 103
D-Link UWS User Manual
• Click Refresh to display the latest information from the router.
Time Zone Configuration
Use the Time Zone Configuration page to configure the time zone difference from Coordinated Universal Time
(UTC).
To display the Time Zone Configuration page, click LAN > Administration > SNTP Time Zone Configuration
in the navigation menu.
Figure 34: Time Zone Configuration
• If you change any of the settings on the page, click Submit to apply the changes to system.
Address Type Specifies the address type of the SNTP Server address for the last received valid
packet.
Server Stratum Specifies the claimed stratum of the server for the last received valid packet.
Reference Clock Id Specifies the reference clock identifier of the server for the last received valid packet.
Server Mode Specifies the mode of the server for the last received valid packet.
Unicast Sever Max
Entries
Specifies the maximum number of unicast server entries that can be configured on
this client.
Unicast Server Current
Entries
Specifies the number of current valid unicast server entries configured for this client.
Broadcast Count Specifies the number of unsolicited broadcast SNTP messages that have been
received and processed by the SNTP client since last reboot.
Table 29: Time Zone Configuration Fields
Field Description
Hours-offset Set the hours difference from UTC. (Range: -12 to +13)
Minutes-offset Set the minutes difference from UTC. (Range: 0–59
Zone Set the acronym of the time zone. (Range: 0–4 characters)
Table 28: Global Status Fields (Cont.)
Field Description
To Next Page
Loading...
Need help?
General
Weight and Dimensions
