Captive Portal Configuration
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 407
D-Link UWS User Manual
Viewing Client Details
The Client Detail page shows detailed information about each client connected to the network through a
captive portal.
Figure 276: Client Detail
The drop-down menu lists each associated client by MAC address. To view status information for a different
client, select its MAC address from the list.
Table 237 describes the fields on the Client Detail page.
Table 237: Client Detail
Field Description
Client IP Address Identifies the IP address of the wireless client (if applicable).
CP Configuration Identifies the CP configuration the wireless client is using.
Protocol Shows the current connection protocol, which is either HTTP or HTTPS.
Session Time Shows the amount of time that has passed since the client was authorized.
Switch Type Shows whether the switch handling authentication for this client is the local switch or
a peer switch in the cluster.
User Name Displays the user name (or Guest ID) of the connected client.
Interface Identifies the interface the wireless client is using.
Verification Shows the current account type, which is Guest, Local, or RADIUS.
Switch MAC Address Shows the MAC address of the switch handling authentication for this client. If
clustering is supported, this field might display the MAC address of a peer switch in the
cluster.
Switch IP Address Shows the IP address of the switch handling authentication for this client. If clustering
is supported, this field might display the IP address of a peer switch in the cluster.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
