Monitoring Status and Statistics
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 444
D-Link UWS User Manual
To use one or more switches as a backup for an AP, use one of the following discovery methods:
• If the AP and any of the peer switches are in the same L2 broadcast domain, L2 Discovery is enabled, and
all the devices use the default VLAN settings, a peer switch will automatically discover the AP if the
primary DWS-4000 Series switch becomes unavailable.
• Configure the IP address of the AP in multiple switches.
• Configure the IP address of up to four switches in the AP while it is in Standalone Mode.
• Configure the DHCP option 43 with the IP addresses of additional switches in the cluster.
Monitoring Status and Statistics
The Status/Statistics folder contains links to the following pages that help you monitor the status and statistics
for your D-Link Unified Switch network:
• Monitoring Status and Statistics
• Managed AP Status
• Associated Client Status/Statistics
• Peer Switch Status
• Radio Resource Measurement Status Information
Wireless Global Status/Statistics
The DWS-4000 Series switch periodically collects information from the APs it manages and from associated
peer switches. The information on the Global page shows status and statistics about the switch and all of the
objects associated with it. You can access the global WLAN statistics by clicking WLAN > Monitoring > Global.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
