Configuring Advanced Settings
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 605
D-Link UWS User Manual
Figure 385: Configuring an AP Profile
Table 353: Access Point Profile Summary
Field Description
Profile Identifies the name of the configured profile.
Profile Status Indicates whether a profile is applied to one or more managed APs and shows the
status for a request to re-apply the profile to its associated managed APs.
The status is one of the following:
• Associated: The profile is configured, and one or more APs managed by the
switch are associated with this profile.
• Associated-Modified: The profile has been modified since it was applied to one
or more associated APs; the profile must be re-applied for the changes to take
effect.
• Apply Requested: After you select a profile and click Apply, the screen refreshes
and shows that an apply has been requested.
• Apply In Progress: The profile is being applied to all APs that use this profile.
During this process the APs reset, and all wireless clients are disassociated from
the AP.
• Configured: The profile is configured, but no APs managed by the switch
currently use this profile.
Profiles
Profile Configuration Pages
To Next Page
Loading...
Need help?
General
Weight and Dimensions
