D-Link DWL-2600AP User Manual

Locating WLAN Devices
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 659
D-Link UWS User Manual
Command Buttons
The page includes the following button:
• Refresh—Updates the page with the latest information.
AP Triangulation Location
The Wireless System continually collects detected signal information about APs and records the data in the AP
triangulation table. The Cluster Controller periodically iterates through the triangulation tables for all APs in
the RF-Scan table and computes the location for each device. The pages available from the AP Triangulation
Location link provide device location information derived from the AP triangulation tables.
AP Triangulation Summary
Use the AP Triangulation Summary page to view a summary of device location information that the Cluster
Control computes based on the data in the AP triangulation table. Click the MAC address of a device to view
additional location information about the device.
Figure 415: AP Triangulation Summary

D-Link DWL-2600AP Specifications

General

Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	300 Mbit/s
Internal	Yes
LED indicators	Power, Stand-by, Status, WAN, WLAN
WAN connection	Ethernet (RJ-45)
Ethernet LAN (RJ-45) ports	1
Security algorithms	WEP, WPA, WPA2
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	160 mm
Height	45 mm
Weight	240 g
Dimensions (WxDxH)	160 x 160 x 45 mm