Configuring Class of Service
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 338
D-Link UWS User Manual
CoS Interface Configuration
Use the CoS Interface Configuration page to apply an interface shaping rate to all ports or to a specific port.
To display the CoS Interface Configuration page, click LAN > QoS > Class of Service > CoS Interface
Configuration in the navigation menu.
Figure 221: Interface Configuration
• If you make changes to the page, click Submit to apply the changes to the system. Click Restore Defaults
to reset all interfaces to the default trust value.
Table 202: Interface Configuration Fields
Field Description
Interface Selects the CoS configurable interface to be affected by the Interface Shaping
Rate. Select Global to apply a rate to all interfaces. Select an individual port to
override the global setting.
Interface Shaping Rate Sets the limit on how much traffic can leave a port. The limit on maximum
transmission bandwidth has the effect of smoothing temporary traffic bursts
over time so that the transmitted traffic rate is bounded. The specified value
represents a percentage of the maximum negotiated bandwidth. The default
value is zero (0). Valid values are 0-100, in increments of 1. A value of 0 means
the maximum is unlimited.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
