User Accounts
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 80
D-Link UWS User Manual
Adding a User Account
Use the following procedures to add a user account. The system supports one Read/Write user and five Read
Only users.
1. From the User menu, select Create.
The screen refreshes.
2. Enter a username and password for the new user, then re-enter the password in the Confirm Password
field.
3. Click Submit to update the switch with the values on this screen.
If you want the switch to retain the new values across a power cycle, you must perform a save.
Changing User Account Information
You cannot add or delete the Read/Write user, but you can change the username and password. To change
the password for an existing account or to overwrite the username on an existing account, use the following
procedures.
1. From the User menu, select the user to change.
The screen refreshes.
2. To alter the username or, delete the existing name in the Username field and enter the new username.
To change the password, delete any asterisks (*) in the Password and Confirm Password fields, and then
enter and confirm the new password.
3. Click Submit to update the switch with the values on this screen.
If you want the switch to retain the new values across a power cycle, you must perform a save.
Deleting a User Account
Use the following procedures to delete any of the Read Only user accounts.
1. From the User menu, select the user to delete.
The screen refreshes.
2. Click Delete to delete the user.
This button is only visible when you have selected a user account with 'Read Only' access. You cannot
delete the 'Read/Write' user.
If you want the switch to retain the new values across a power cycle, you must perform a save.
Encryption Key If you selected DES in the Encryption Protocol field enter the SNMPv3
Encryption Key here. Otherwise this field is ignored. Valid keys are 0 to 15
characters long. The Apply check box must be selected in order to change the
Encryption Protocol and Encryption Key.
Table 13: User Accounts Fields (Cont.)
Field Description
To Next Page
Loading...
Need help?
General
Weight and Dimensions
