Monitoring Status and Statistics
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 495
D-Link UWS User Manual
Table 290 shows the information the WIDS AP Rogue Classification page shows for an individual access point.
Command Buttons
• Acknowledge—Clears the rogue status of the AP in the RF Scan database.
• Refresh—Updates the page with the latest information.
Table 290: WIDS AP Rogue Classification
Field Description
MAC Address The Ethernet MAC address of the detected AP. This could be a physical radio
interface or VAP MAC. For D-Link APs this is always a VAP MAC address.
Status Indicates the managed status of the AP, whether this is a valid AP known to the
switch or a Rogue on the network. The valid values are:
• Managed: The neighbor AP is managed by the wireless system.
• Standalone: The AP is managed in standalone mode and configured as a valid AP
entry (local or RADIUS).
• Rogue: The AP is classified as a threat by one of the threat detection algorithms.
• Unknown: The AP is detected in the network but is not classified as a threat by
the threat detection algorithms.
Test Description Identifies the tests that were performed, which includes the following:
• Administrator-configured rogue AP
• Managed SSID received form an unknown AP
• Managed SSID from a fake managed AP
• Managed SSID received from an AP without an SSID
• Beacon Received from a fake managed AP on a invalid channel
• Managed SSID detected with incorrect security configuration
• Invalid SSID received from managed AP.
• AP is operating on an illegal channel
• Standalone AP is operating with unexpected configuration.
• Unexpected WDS device is detected on the network.
• Unmanaged AP detected on wired network.
For more information about these tests, see Table 362 on page 632
Condition Detected Indicates whether the result of the test was true or false.
Reporting MAC
Address
Identifies the MAC address of the AP that reported the test results.
Radio Identifies which physical radio on the reporting AP was responsible for the test
results.
Test Config Shows whether this test is configured to report rogues. Each test can be globally
enabled or disabled to report a positive result as a rogue.
Test Result Shows whether this test reported the device as rogue. In some cases the test may
report a positive result, be enabled, but not report the device as rogue because the
device is allowed to operate in this mode.
Time Since First Report Time stamp indicating how long ago this test first detected the condition.
Time Since Last Report Time stamp indicating how long ago this test last detected the condition.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
