Basic Setup
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 574
D-Link UWS User Manual
Local OUI Database Summary
To help identify AP and Wireless Client adapter manufacturers detected in the wireless network, the wireless
switch contains a database of registered Organizationally Unique Identifiers (OUIs). This is a read-only list with
over 10,000 registrations. From the Local OUI Database Summary page, you can enter up to 64 user-defined
OUIs. The local list is searched first, so the same OUI can be located in the local list as well as the read-only list.
Figure 367: Local OUI Database Summary
After you enter the OUI value and description, click Add to add the OUI to the local database.
Command Buttons
The page includes the following buttons:
• Add—Adds the OUI value and description information to the local OUI database.
• Delete—Deletes any selected OUI entries from the local OUI database. This button is available if the check
box next to at least one OUI entry is selected.
• Delete All—Deletes all manually-added entries from the local OUI database.
• Refresh—Updates the page with the latest information.
Table 336: Local OUI Database Summary
Field Description
OUI Value Enter the OUI that represents the company ID in the format XX:XX:XX where XX is a
hexadecimal number between 00 and FF. The first three bytes of the MAC address
represents the company ID assignment.
Note: The first byte of the OUI must have the least significant bit set to 0. For
example 02:FF:FF is a valid OUI, but 03:FF:FF is not.
OUI Description Enter the organization name associated with the OUI. The name can be up to 32
alphanumeric characters.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
