D-Link DWL-2600AP User Manual

Configuring SNTP Settings
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 105
D-Link UWS User Manual
Summer Time Recurring Configuration
Clicking the Recurring check box indicates that the configuration is to be repeated every year. When you select
Recurring, the fields shown in the following table occur.
Figure 36: Summer Time Recurring Configuration
Table 31: Summer Time Recurring Configuration Fields
Field Description
Summertime Enable or disable summer time mode.
Recurring Select the check box to indicate that the configuration is to be repeated every year.
Location This field displays only when the Recurring check box is selected. The summer time
configuration is predefined for the United States and European Union. To set the summer
time for a location other than the USA or EU, select None.
Offset Set the number of minutes to add during summer time in the range 0 to 1440.
Zone Set the acronym of the time zone to be displayed when summer time is in effect. The range
is 0 to 4 characters.

D-Link DWL-2600AP Specifications

General

Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	300 Mbit/s
Internal	Yes
LED indicators	Power, Stand-by, Status, WAN, WLAN
WAN connection	Ethernet (RJ-45)
Ethernet LAN (RJ-45) ports	1
Security algorithms	WEP, WPA, WPA2
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	160 mm
Height	45 mm
Weight	240 g
Dimensions (WxDxH)	160 x 160 x 45 mm