D-Link DWL-2600AP User Manual

Login Session
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 86
D-Link UWS User Manual
Login Session
Use the Login Session page to view information about users who have logged on to the switch.
To access the Login Session page, click LAN > Monitoring > Login Session in the navigation tree.
Figure 21: Login Session
The Login Session page has the following read-only fields:
• Click Refresh to update the information on the screen.
Table 16: Login Session Fields
Field Description
ID Identifies the ID of this row.
User Name Shows the user name of the user who is currently logged on to the switch.
Connection From Shows the IP address of the system from which the user is connected. If the
connection is a local serial connection, the Connection From field entry is EIA-
232.
Idle Time Shows the idle session time.
Session Time Shows the total session time.
Session Type Shows the type of session, which can be Telnet, Serial Port, HTTP, or SSH.

D-Link DWL-2600AP Specifications

General

Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	300 Mbit/s
Internal	Yes
LED indicators	Power, Stand-by, Status, WAN, WLAN
WAN connection	Ethernet (RJ-45)
Ethernet LAN (RJ-45) ports	1
Security algorithms	WEP, WPA, WPA2
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	160 mm
Height	45 mm
Weight	240 g
Dimensions (WxDxH)	160 x 160 x 45 mm