System Description
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 63
D-Link UWS User Manual
System Description
After a successful login, the System Description page displays. Use this page to configure and view general
device information.
To display the System Description page, click LAN > Administration > System Description in the navigation
tree.
Figure 7: System Description
Table 3: System Description Fields
Field Description
System Description The product name of this switch.
System Name Enter the name you want to use to identify this switch. You may use up to 31 alpha-
numeric characters. The factory default is blank.
System Location Enter the location of this switch. You may use up to 31 alpha-numeric characters. The
factory default is blank.
System Contact Enter the contact person for this switch. You may use up to 31 alpha-numeric
characters. The factory default is blank.
IP Address The IP Address assigned to the network interface. To change the IP address, see
“Serial Port” on page 73.
System Object ID The base object ID for the switch's enterprise MIB.
System Time (yyyy-
mm-dd h:m:s)
Enter the current date and time that the switch will follow using the on-board real-
time clock.
System Up Time Displays the number of days, hours, and minutes since the last system restart.
Current SNTP
Synchronized Time
Displays currently synchronized SNTP time in UTC. If no SNTP server has been
configured and the time is not synchronized, this field displays “Not Synchronized.”
To specify an SNTP server, see “Configuring SNTP Settings” on page 97.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
