D-Link DWL-2600AP User Manual

Managing LLDP
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 271
D-Link UWS User Manual
• Click Refresh to update the page with the latest information from the router.
Inventory Specifies the inventory TLV present in LLDP frames:
• Hardware Revisions. Specifies hardware version.
• Firmware Revisions. Specifies firmware version.
• Software Revisions. Specifies software version.
• Serial Number. Specifies serial number.
• Manufacturer Name. Specifies manufacturer’s name.
• Model Name. Specifies model name.
• Asset ID. Specifies asset ID.
Location Information Specifies if location TLV is present in LLDP frames:
• Sub Type: Specifies type of location information.
• Location Information: Specifies the location information as a string for
given type of location ID.
Table 152: LLDP-MED Local Device Information Fields (Cont.)
Field Description

D-Link DWL-2600AP Specifications

General

Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	300 Mbit/s
Internal	Yes
LED indicators	Power, Stand-by, Status, WAN, WLAN
WAN connection	Ethernet (RJ-45)
Ethernet LAN (RJ-45) ports	1
Security algorithms	WEP, WPA, WPA2
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	160 mm
Height	45 mm
Weight	240 g
Dimensions (WxDxH)	160 x 160 x 45 mm