D-Link DWL-2600AP User Manual

Captive Portal Configuration
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 399
D-Link UWS User Manual
WISPr-Bandwidth-
Max-Down
14122, 8 Maximum client receive rate
(b/s). Limits the bandwidth at
which the client can receive
data from the network. If the
attribute is 0 or not present,
then use the value
configured for the captive
portal.
Integer Optional –
D-Link-Max-Input-
Octets
171, 124 Maximum number of octets
the user is allowed to
transmit. After this limit has
been reached, the user will
be disconnected. If the
attribute is 0 or not present,
then use the value
configured for the captive
portal.
Integer Optional –
D-Link-Max-Output-
Octets
171, 125 Maximum number of octets
the user is allowed to
receive. After this limit has
been reached, the user will
be disconnected. If the
attribute is 0 or not present,
then use the value
configured for the captive
portal.
Integer Optional –
D-Link-Max-Total-
Octets
171, 126 Maximum number of octets
the user is allowed to
transfer (sum of octets
transmitted and received).
After this limit has been
reached, the user will be
disconnected. If the attribute
is 0 or not present, then use
the value configured for the
captive portal.
Integer Optional –
Table 230: Captive Portal User RADIUS Attributes
Attribute Number Description Range Usage Default

D-Link DWL-2600AP Specifications

General

Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	300 Mbit/s
Internal	Yes
LED indicators	Power, Stand-by, Status, WAN, WLAN
WAN connection	Ethernet (RJ-45)
Ethernet LAN (RJ-45) ports	1
Security algorithms	WEP, WPA, WPA2
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	160 mm
Height	45 mm
Weight	240 g
Dimensions (WxDxH)	160 x 160 x 45 mm