Monitoring Status and Statistics
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 529
D-Link UWS User Manual
Command Buttons
The page includes the following buttons:
• Submit—Updates the switch with the values you enter. To retain the new values across a power cycle,
you must perform a save (Tool > Save Changes).
• Abort—Cancel the current measurement request.
• Refresh—Updates the page with the latest information.
Channel Load
Measurement Status
Status of the current measurement, which is one of the following:
• Not Started
• In Progress
• Success—Last measurement completed.
• Timed Out—Last measurement timed out.
• Aborted—Administrator aborted the last request.
• Incapable—Client is not capable of taking the requested measurement.
• Refused—Client refused to perform the measurement.
Time Remaining Number of seconds before the measurement request times out.
New Request Configuration
Client MAC Address Enter the MAC address of the client to measure its channel load.
Channel Enter the channel the client should use to measure the load.
Duration Enter the number of time units (TUs) for which to measure the channel. Each TU is
equal to 1024 μs.
Table 316: RRM Channel Load Configuration (Cont.)
Field Description
To Next Page
Loading...
Need help?
General
Weight and Dimensions
