System administration Configuresystem information
IX20 User Guide
1004
Configuration items
n
Aname for the device.
n
The name of a contact for the device.
n
The location of the device.
n
Adescription of the device.
n
Abanner that will be displayed when users accessterminal serviceson the device.
To enter system information:
Web
1. Log into Digi Remote Manager, or log into the local Web UI asa user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click System.
4. For Name, type a name for the device. Thisname will appear in log messages and at the
command prompt.
5. For Contact, type the name of a contact for the device.
6. For Location, typethe location of the device.
To Next Page
Loading...
Need help?
General