Digi IX20 - Nemo

Virtual PrivateNetworks(VPN) NEMO
IX20 User Guide
636
n
automatic: Usesa pre-shared key to generate association key information, which is
periodically rotated through using 802.1x.
n
manual: Uses connectivity association key information that ismanually entered.
7. If you specified the manual security mode, enter the connectivity association key and key
name.
a. Specify the connectivity association key:
(config vpn macsec tunnel1) association cak value
(config vpn macsec tunnel1)>
where value is the association key. The key format is 16 hex digits.
b. Specify the connectivity association key name:
(config vpn macsec tunnel1) association ckn value
(config vpn macsec tunnel1)>
where value is the association key name. The key format is 32 hex digits.
8. Save the configuration and apply the change
(config)> save
Configuration saved.
>
9. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
NEMO
Network Mobility (NEMO) isa mobile networking technology that providesaccess to one or more
Local Area Networks(LANs) on your device. NEMOcreatesa tunnel between the home agent on the
mobile private network and the IX20 device, isolating the connection from internet traffic and
advertising the IPsubnets of the LANs for remote accessand device management.
Dynamic Mobile Network Routing (DMNR) is the implementation of NEMOfor Verizon WirelessPrivate
Networks. DMNRsupport requires the use of Verizon SIMcards that have DMNRenabled.