System administration Schedulesystem maintenancetasks
IX20 User Guide
1035
Schedule system maintenance tasks
You can configure tasks to berun during a specified maintenance window. When the device iswithin
its maintenance window, firmware updates and Digi Remote Manager configuration checkswill be
performed.
You can also schedule custom scripts to run during the maintenance window. See Configure scriptsto
run automatically for more information.
Required configuration items
n
Eventsthat trigger the maintenance window to begin.
n
Whether all configured triggers, or only one of the triggers, must be met.
n
The tasksto beperformed. Optionsare:
l
Firmware updates.
l
Digi Remote Manager configuration check.
n
Whether the device will check for updates to the device firmware.
n
Whether the device will check for updates to the modem firmware.
n
The frequency (daily, weekly, or monthly) that checksfor firmware updateswill run.
Web
1. Log into Digi Remote Manager, or log into the local Web UI asa user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
To Next Page
Loading...
Need help?
General