Digi IX20 - Exit the Command Line Interface; Execute a Command from the Web Interface

Command lineinterface Exit the command lineinterface
IX20 User Guide
1133
Access selection menu:
a: Admin CLI
s: Shell
q: Quit
Select access or quit [admin] :
Type a or admin to accessthe IX20 command line.
You will now beconnected to the Admin CLI:
Connecting now...
Press Tab to autocomplete commands
Press '?' for a list of commands and details
Type 'help' for details on navigating the CLI
Type 'exit' to disconnect from the Admin CLI
>
See Command line interfacefor detailed instructionson using the command line interface.
Exit the command line interface
 Command line
1. At the command prompt, type exit.
> exit
2. Depending on the device configuration, you may bepresented with another menu, for
example:
Access selection menu:
a: Admin CLI
s: Shell
q: Quit
Select access or quit [admin] :
Type q or quit to exit.
Execute a command from the web interface
Log into the IX20 WebUI asa user with full Admin accessrights.
1. At the main menu, click Terminal. The device console appears.
IX20 login:
2. Select the device in Remote Manager and click Actions> Open Console, or log into the IX20
local command line as a user with full Admin access rights.