System administration Configuration files
IX20 User Guide
1030
Configuration files
The IX20 configuration file, /etc/config/accns.json, contains all configuration changesthat have been
made to the device. It does not contain the complete device configuration; it only containschanges to
the default configuration. Both the default configuration and the changes contained in the accns.json
file are applied when the device reboots.
Save configuration changes
When you make changes to the IX20 configuration, the changes are not automatically saved. You must
explicitly save configuration changes, which also appliesthe changes. If you do not save configuration
changes, the system discards the changes.
Web
1. Log into Digi Remote Manager, or log into the local Web UI asa user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Make any necessary configuration changes.
4. Click Apply to savethe configuration and apply the change.
Command line
To Next Page
Loading...
Need help?
General