Digi IX20 - Configure an L2 Tpv3 Tunnel

Virtual PrivateNetworks(VPN) L2TPv3 Ethernet
IX20 User Guide
628
Configure an L2TPv3 tunnel
Your IX20 device supportsLayer 2Tunneling Protocol Version 3 (L2TPv3) static unmanaged Ethernet
tunnels.
Required configuration items
n
A name for the L2TPv3 tunnel.
n
Enable the tunnel.
n
The remote endpoint IPaddress.
n
The local endpoint IPaddress.
n
The session ID.
n
The peer session ID.
Additional configuration items
n
Encapsulation type. If UDPis selected:
l
The ID for the tunnel.
l
The ID of the peer's tunnel.
l
Determine whether to enable UDPchecksum.
n
The session cookie.
n
The peer session cookie.
n
The Layer2SpecificHeader type.
n
The Sequence numbering control.
 Web
1. Log into Digi Remote Manager, or log into the local Web UI asa user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.