Services Location information
IX20 User Guide
706
type modem
(config)>
b. Use the index number to enable or disable the module:
n
To enable the module:
(config)> service location source 0 enable true
(config)>
n
To disable the module:
(config)> service location source 0 enable false
(config)>
Alternatively, you can use the index number to delete the USB location source:
(config)> del service location 0
(config)>
4. (Optional) Set a label for this location source:
(config)> service location source 0 label "label"
(config)>
5. Save the configuration and apply the change
(config)> save
Configuration saved.
>
6. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Configure the device to use a user-defined static location
You can configured your IX20 device to use a user-defined static location.
Web
1. Log into Digi Remote Manager, or log into the local Web UI asa user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
To Next Page
Loading...
Need help?
General