Digi IX20 User Manual

Interfaces Bridging
IX20 User Guide
234
Bridging
Bridging is a mechanism to create a single network consisting of multiple devices, such asEthernet
devices and wireless accesspoints. You can also use bridging to create a Vitural LAN switchport
bridge. See Create a VLAN using switchport modefor more information about switchport bridging for
VLANs.
By default, the IX20 has the following preconfigured bridges:
Interface
type Preconfigured interfaces Devices
Default
configuration
Bridges
(Wi-Fi
model only)
n
Bridge: LAN
n
Ethernet:
ETH2
n
Wi-Fi access
point: Digi
AP
n
Enabled
n
Used by the
ETH1 interface
Interface type Preconfigured interfaces Devices
Default
configuration
You can modify configuration settings for the existing bridge, and you can create new bridges.
This section contains the following topics:
Edit the preconfigured ETH2 bridge 235
Configure a bridge 238

Digi IX20 Specifications

General

Category	Wireless Router
Cellular Connectivity	4G LTE
Ethernet Ports	4
Wi-Fi	802.11ac
SIM Slots	2
WAN Ports	1
LAN Ports	3
Weight	0.5 kg
Operating Temperature	-40°C to +70°C (-40°F to +158°F)