Digi IX20 User Manual

Wi-Fi Wi-Fi configuration
IX20 User Guide
312
Wi-Fi configuration
The Wi-Fi enabled IX20Wdevice has one Wi-Fi radio. You can configure the Wi-Fi radio for Wi-Fi access
point mode and Wi-Fi client mode. By default, the IX20Wradio is configured to use accesspoint mode.
Note When Primary Responder mode isenabled, pre-configured accesspoints are disabled by default.
For more information about Primary Responder mode, see Differences between standard firmware
operation and Primary Responder mode.
Default accesspoint SSID and password
By default, the IX20Wdevicehas one access point enabled. The default SSIDfor the accesspoints is:
Digi-IX20W-serial_number
The password for the default accesspoint is the unique password as found on the device's label. See
Change the default SSIDand pre-shared key for the preconfigured Wi-Fi access point for information
about changing the default SSIDand password.
Default Wi-Fi configuration
The default Wi-Fi configuration of the IX20Wdevice is:

Digi IX20 Specifications

General

Category	Wireless Router
Cellular Connectivity	4G LTE
Ethernet Ports	4
Wi-Fi	802.11ac
SIM Slots	2
WAN Ports	1
LAN Ports	3
Weight	0.5 kg
Operating Temperature	-40°C to +70°C (-40°F to +158°F)